Amazing Kerbstone Laying Process – Step by Step!
By physically dividing pedestrian zones from roads, kerb stones contribute significantly to the aesthetics and safety of urban infrastructure. Achieving a long-lasting and aesthetically pleasing finish requires knowing the correct way to install curb stone, whether you’re a professional contractor or a do-it-yourself enthusiast. This blog post will take you step-by-step through the entire kerbstone installation procedure, from early design to final touches.
Tools and Materials Needed
Prior to commencing, collect the required instruments and supplies:
Tools
- Shovel
- Concrete mixer or bucket
- Measuring tape
- String lines
- Hammer and chisel
- Rubber mallet
- Spirit level
- Trowel
- Safety glasses and gloves
- Wheelbarrow or dolly
- Mason's line
- Stakes or pins
Materials
- Kerb stones
- Sand or crushed stone for the base
- Cement and water for mixing concrete
- Rebar or reinforcement mesh
- Gravel or crushed stone for backfilling
- Concrete sealer
- Mortar mix for pointing
Step 1: Planning and Preparation
After that, dig a trench as deep as necessary—usually between 150 and 200 mm—to make room for the kerb stones and to create a sturdy base. To improve drainage and stability, cover the bottom of the trench with a layer of gravel or crushed stone.
Step 2: Excavation and Foundation
Make sure the area is level and clear of obstacles before excavating it to the required depth. For a sturdy footing for the kerb stones, lay a sub-base made of compacted crushed stone or concrete. To stop this base from moving and settling over time, it needs to be thoroughly compacted and levelled.
Step 3: Laying the Kerb Stones
A chisel and hammer or masonry saw can be used to cut kerb stones so they fit around corners or other obstructions. When cutting stone, always wear gloves and safety eyewear to keep yourself safe from flying debris
Step 4: Filling and Finishing
After all of the kerb stones are in position, use more mortar to close up any spaces left between them. To get a tidy, consistent finish and to smooth the joints, use a trowel. Let the mortar fully cure before adding any more sealants or finishes.
Step 5: Backfilling and Compaction
Crushed stone or gravel should be used to backfill the space behind the curb stones once the mortar has hardened. For the kerb stones to have even more stability and support, compact the backfill material. In order to stop movement and preserve the installation’s integrity, this step is essential.
Step 6: Final Touches
To prolong the kerb stones’ lifespan and prevent deterioration, apply a concrete sealant to them. Your kerb stones can last for many years if you perform routine maintenance on them, such as cleaning and repointing every now and again.
